Abstract: The transportation sector is witnessing a rapid shift towards the use of electric vehicles as a sustainable alternative to conventional combustion vehicles.[34] B. johns, T. Antonacci and K. Siddabattula, 2012, 'Designing a Qi-compliant receiver coil for wireless power systems, Texas Instruments Incorporated, part 1,[14] S. Li and C. Mi, 2015 "Wireless Power Transfer for Electric Vehicle Applications," Journal of Emerging and Selected Topics in Power Electronics, vol. 3, no. 1, pp. 4-17. [15] J. Villa, J. Sallan, J. Osorio, A. Llombart, 2012 High-misalignment tolerant compensation topology For ICPT Systems, IEEE Trans. Indust. Electr. 59, 945-951. [16] K. Kalwar, S. Mekhilef, M. Seyedmahmoudian, B. Horan, 2016 Coil design for high misalignment tolerant inductive power transfer system for EV charging, Energies vol 9 pp. 937. [17] C. Panchal, S. Stegen, J. Lu 2018 'Review of static and dynamic wireless electric vehicle charging system' Griffith School of Engineering, Griffith University, Nathan Campus, Brisbane 4111, Australia

[18] D. Leskarac, C. Panchal, S. Stegen, J. Lu, 2015 PEV Charging Technologies and V2G on Distributed Systems and Utility Interfaces, in J. Lu, J. Hossain (Eds.), Vehicle-to-Grid: Linking Electric Vehicles to the Smart Grid, The Institution of Engineering and Technology (IET), London, United Kingdom, pp. 157-209. [19] C. Panchal, J. Lu, S. Stegen, 2017 Static in-wheel wireless charging systems for electric vehicles, Int. J. Sci. Technol. Res. 6 280-284. [20] D. Vilathgamuwa, J. Sampath, 2015 Wireless Power Transfer (WPT) for Electric Vehicles (EVs)--Present and Future Trends, in: S.F. Rajakaruna, , Springer International Publishing AG, 2015, pp. 33-60. [21] W. Zhang and C. Mi, 2016 Compensation Topologies of High-Power Wireless Power Transfer Systems, IEEE Transactions on Vehicular Technology, vol. 65, no. 6, pp. 4768-4778. [22] C. Wang, G. Covic and O. Stielau, 2004 "Power Transfer Capability and Bifurcation Phenomena of Loosely Coupled Inductive Power Transfer Systems," IEEE Transactions on Industrial Electronics, vol.[6] A. Kurs, A. Karalis, R. Moffatt, J. Joannopoulos, P. Fisher and M. Soljacic, 2007 "Wireless Power Transfer via Strongly Coupled Magnetic Resonances," Science, vol. 317, no. 5834, pp. 83-86, 
[7] B. Regensburger, S. Sinha, A. Kumar, J. Vance, Z. Popovic, and K. K. Afridi, 2018 "Kilowatt-Scale Large Air-Gap Multi-Modular Capacitive Wireless Power Transfer System for Electric Vehicle Charging," in IEEE Applied Power Electronics Conference and Exposition (APEC), San Antonio, USA.30, no. 11, pp. 6017-6029, 201 
[10] J. Moon, H. Hwang, B. Jo, C. Kwon, T. Kim and S. Kim, 2017 "Design and Implementation of a high-efficiency 6.78MHz resonant wireless power transfer system with a 5W fully integrated power receiver," IET Power Electronics, vol. 10, no. 5, pp. 577-578. [11] V. Esteve, J. Jordan, E. Sanchis-Kilders, E. Dede, E. Maset, J. Ejea and A. Ferreres, 2015 "Comparative Study of a Single Inverter Bridge for Dual-Frequency Induction Heating Using Si and SiC MOSFETs," IEEE Transactions on Industrial Electronics, vol.[25] J. Miller, P. Schrafel, B. Long and A. Daga, 2016, The WPT dilemma - High k or high Q, in IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Knoxville, USA, 
[26] R. Bosshard, J. Muehlethaler, J. Kolar and I. Stevanovic, 2013 Optimized Magnetic Design for Inductive Power Transfer Coils, in Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, USA.[28] R. Bosshard, J. Muehlethaler, J. Kolar and I. Stevanovic, 2013, Optimized Magnetic Design for Inductive Power Transfer Coils, in Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, USA
[29] W. Chen, C. Liu, C. Lee, Z. Shan, 2016, Cost-effectiveness comparison of coupler designs of wireless power transfer for electric vehicle dynamic charging, Energies 9, 906.[8] M. Kline, I. Izyumin, B. Boser and S. Sanders, 2011 "Capacitive Power Transfer for Contactless Charging," in Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Forth Worth, USA. [9] J. Dai and D. Ludois, 2015 "A Survey of Wireless Power Transfer and a Critical Comparison of Inductive and Capacitive Coupling for Small Gap Application," IEEE Transactions on Power Electronics, vol.[27] R. Laouamer, M. Brunello, J. Ferieux, O. Normand and N. Buchheit, 1997, A Multi-Resonant Converter for Non-Contact Charging with Electromagnetic Coupling, in 23rd International Conference on Industrial Electronics, Control and Instrumentation (IECON), New Orleans, USA.This pioneering invention opened up new horizons for wireless charging.40, pp. 91-100.Transp.1.