لخّصلي

Paint:

The final stages of building finishing begin with paint and color work

Their types, uses, and implementation methods vary according to the aesthetic aspect that the paint adds to the walls and ceilings

And also according to the type of architectural style of the house to be painted, with

different tastes

Paints are used to protect surfaces from natural influences and give the surfaces a

specific color, the degree of which is controlled with high precision Paint is defined as

a chemical substance that is placed on surfaces (iron, wood, concrete, etc.) and then dries to give a thin thickness of a specific color

The first step: after preparing the surfaces and ensuring that they are completely clean and dry is to apply the base laver or sealer, also known as the grinding process.The function of this layer is as follows: 1-To ensure adhesion between the surface and the different lavers of paint

2-Facilitating the painting of the following layers

3-Filling voids and pores and making the surface solid 4- Reduces corrosion.

Paint:

The final stages of building finishing begin with paint and color work

Their types, uses, and implementation methods vary according to the aesthetic aspect that the paint adds to the walls and ceilings

And also according to the type of architectural style of the house to be painted, with

different tastes

Paints are used to protect surfaces from natural influences and give the surfaces a

specific color, the degree of which is controlled with high precision Paint is defined as

a chemical substance that is placed on surfaces (iron, wood, concrete, etc.) and then dries to give a thin thickness of a specific color

The first step: after preparing the surfaces and ensuring that they are completely clean and dry is to apply the base laver or sealer, also known as the grinding process.

The function of this layer is as follows: 1-To ensure adhesion between the surface and the different lavers of paint

2-Facilitating the painting of the following layers

3-Filling voids and pores and making the surface solid 4- Reduces corrosion.

The second step: As a result of what was done after making the base laver, the

surface is treated with putty

It is a paste-shaped compound used to fill gaps and make the surface flat. t is done in two layers, with each layer being a different color from the other (the most common white and yellow).

The third step: After making the paste and making sure it is dry, the surfaces sanded to smooth and level them, then the dust resulting from this process is cleaned.

The fourth step: After ensuring that the putty layer is leveled, the lining laver is a first

layer of the same paint used and in the color to be applied

After dissolving the paint with water if it is plastic paint, or with other thinners such .as gasoline, in the case of oil paints, any other colorings to be used are added Start painting the nooks and crannies using a brush to ensure that the paint penetrates

and reaches all the details of the surface. Then the rest of the surface is com

using the roller from top to bottom and then vice versa.