Lakhasly

The harmful gases and odors caused by the activities of industrial facilities and enterprises pose a great threat to human and environmental health.After the scrubbing process, the cleaned gas exits the scrubber through an outlet duct.The goal in absorption and wet scrubbing equipment is the removal of gases and particulate matter from an exhaust steam by causing the gaseous contamination to become dissolved into the liquid stream and the solids to be entrained in the liquid The liquid most used is water.-Last stage: pollutant removal and clean gas exit: Pollutants are captured by the liquid and either dissolved, chemically reacted, or collected in particulate form.A scrubber is a cleaning installation whose main purpose is to neutralize harmful components in industrial air or waste gas streams.Wet scrubbers are devices that remove pollutants from a gas stream.

The harmful gases and odors caused by the activities of industrial facilities and enterprises pose
a great threat to human and environmental health. A scrubber is a cleaning installation whose main purpose is to neutralize harmful components in
industrial air or waste gas streams. The removal of gas particles causing many problems from
the gas stream during the process is necessary before disposing of the gases in the open air. Our scrubber is wet that it uses to separate ammonia from air by passing water. Wet scrubbers are devices that remove pollutants from a gas stream. The goal in absorption and
wet scrubbing equipment is the removal of gases and particulate matter from an exhaust steam
by causing the gaseous contamination to become dissolved into the liquid stream and the solids
to be entrained in the liquid The liquid most used is water. When considered in terms of its advantages, the wet scrubbing system is important in that the
flammable dry dusts that may accumulate in the gas streams do not pose a problem when using
the wet scrubber. Mechanism of wet scrubber: -Stage1: enters of gas (air+ ammonia)
Gas enters at the bottom and passes upward through the bed. -Stage 2: enters of liquid(water)
Scrubbing liquid (often water) is introduced into the scrubber. This liquid can be sprayed or
introduced through a packed bed or tray system. -Stage3: Contact Between Gas and Liquid
The gas and liquid mix, allowing the pollutants to dissolve. -Last stage: pollutant removal and clean gas exit:
Pollutants are captured by the liquid and either dissolved, chemically reacted, or collected in
particulate form. After the scrubbing process, the cleaned gas exits the scrubber through an outlet duct.